HDW-20 folding and compression testing machine for fire doors
Brief introduction：Device parameters and configuration:
Device parameters and configuration:
| Technical parameters | To configure |
1. Maximum test power: 20KN; 2, range: 0N-20KN; 3. Accuracy of test force; better than 1%. 4, displacement resolution: 0.001mm; 5. The accuracy of displacement measurement is better than 1%. 6, stretching stroke: 800mm 7, compression stroke: 800mm 8, test journey: 800mm 9. Displacement speed control range: 0.1 ~ 500mm/min 10, the accuracy of displacement speed control is better than 1%. 11. Test machine level: better than grade 1. 12. The test process, measurement, display, analysis and control are completed by microcomputer. 13. It can meet the control modes of stress, strain and displacement. 14. After the specimen is damaged, the moving beam stops moving automatically (or automatically returns to the initial position). 15. Program controlled and mechanical two level limit protection. 16, when the load exceeds the rated value of 3 ~ 5%, automatic shutdown. 12. Test machine size: 730*360*1750 mm 13. Appearance: in line with GB/T2611 requirements 14, complete set: meet the standard requirements 15. Protection function: the tester has overload and limit protection function. 16, power supply: 220V, 50Hz, 1500W 17, weight: 260KG | 1. 20kN high strength main engine (portal frame structure, whole machine spray treatment). 2. high precision photoelectric encoder 3. high precision AC servo speed control system and AC servo motor. 4. Taiwan ABBA high precision ball screw two sets 5. high precision arc synchronous deceleration system 6. 20KN high precision spoke sensor 7. each special set of stretches, compressing and bending aids for testing machines. 8. Lenovo brand computer 9. HP color inkjet printer. 10. a special test control card for testing machine. 11. WINDOWS98/2000/XP/2007 operating environment, a set of special software for MaxTest testing machine, multi-language printing of color technical image data, automatic operation, a single person to complete independently and easily. |
Two. Main uses:
This series of microcomputer controlled electronic universal testing machine is suitable for testing mechanical properties of rubber, plastics, textiles, waterproof materials, wire and cable, mesh rope, wire, rod, plate, various metals, non-metals and composite materials. If various tensile tests are carried out, the compression can be easily completed by changing accessories. Bending test. The tensile testing machine controlled by microcomputer has the functions of digital display of testing force, continuous adjustable testing speed, automatic stop of specimen breaking and peak value maintenance. The test results fully meet the requirements of relevant national first-class standards.
Three. Quality assurance:
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three-package period of the equipment is one year from the date of formal delivery (unless otherwise stipulated by the supplier). During the three-package period, the supplier will provide timely service and maintenance for all kinds of equipment failures. If the equipment out of warranty fails in use, the supplier will serve the orderer in time and actively assist the orderer to complete the maintenance task.
If it is not the model you want, please check the electronic universal testing machine page, or call the hotline 0531-85860713!
